 Space News space history and artifacts articles Messages space history discussion forums Sightings worldwide astronaut appearances Resources selected space history documents |
If you have previously registered, but forgotten your password, click here.
collectSPACE uploaded Pettit's video to YouTube (as above), where for a few days, it was the top viewed Science and Technology video on that site. Since then, the video has been watched nearly half a million times. (On December 1, Pepsi included the clip in its daily round-up of viral videos.) Hoping I might have a chance to chat with Pettit after Thursday night's STS-126 crew post-flight briefing at Space Center Houston, I decided to create a replica of his cup. As Pettit describes in the video, the plastic for the cup was taken from the cover of a flight data file, so I stopped by an office supply store and purchased a report cover. In orbit, Kapton polymide tape was used to hold the cup together. Despite my best effort, I was unable to find a local store that stocks Kapton, so another 3M product, Scotch tape was substituted (if I ever come across a few strips of Kapton, I will use it to cover the clear tape). The crew briefing included a mission highlights video, which briefly featured the cup. Afterward, I was able to catch up with Pettit and show him the recreated cup. He looked it over, commenting that it was a tad bigger than those he made in orbit but that its shape was correct. I was curious as to how he built his, as without the benefit of a table (and gravity), I couldn't imagine being able to attach the base to the walls. It turned out, he didn't need to: he fabricated his cup from one piece of plastic (whereas mine was two), hinging the base on one side. As he autographed the cup (at my request), he mentioned that National Geographic contacted him to write an article about the cup, and that he built one for them. (Now, why didn't I think of that?) Before parting ways, he also shared that he had kept the cups that he built in space.  | ||||||||
| music_space | When I saw the video originally, I thought that someone should a) manufacture replicas and b) manufacture build-it-yourself educational kits, intended for the memorabilia market, Now that the video turned viral, I definitely think so! A nice project for buySPACE, no? | |||||||
| Mr Meek | Ah, so this is the 1:1 space vessel. Well played. | |||||||
| ejectr | Good luck trying to forge THAT autograph! | |||||||
| xlsteve | That’s pretty cool, Robert. I passed the clip on to my wife when it was posted here to show her students. I think this might be a neat project for her to do with the class the next time she covers space. | |||||||
| Robert Pearlman | quote:I don't know about selling it, but I think it would be cool to produce a pattern that could be freely distributed as an educational tool. | |||||||
| music_space | To make a practical demonstration, one could try to somewhat demonstrate, even in 0-g, the fluid dynamics at work here. Find a suitable edible liquid with more viscosity than water - a syrup, or a diluted Jello receipe, and make a smaller model of the cup, so the capillarity action could be seen. | |||||||
| Robert Pearlman | Tuvie: On-Orbit Coffee Cup Design to Use in Spacecraft This inventive coffee cup concept came to Donald Pettit’s mind, who is an astronaut, during the mission STS-126. Instead of using a straw to drink his morning coffee inside a heated aluminum bag, Donald created a cup that could hold liquid in zero gravitation. Travis Baldwin tried to offer his service as a designer to assist him in developing his idea into a real product. 
| |||||||
advertisement